Side nav buttons
 
High Speed Press Grommet Production Chart Contact Machine Photo Resource FAQ Home Zipper Components

STRIPPER

  1. Mount fixture on table, use3 3 screws 5/16"
  2. Connect ari hose: Set air pressure at approx. 70 ~ 80 P.S.I.
  3. Connect electric power line 110V
  4. Turn toggle switch "ON" the "Red" indicator light will glow.
  5. Place open zipper in fixture by inserting the scoops into the stripping blade.
  6. Close the guard softly. Check that indicator light is "ON" & PRESS the guard down a bit & this will activate the micro switch to deploy the air cylinder & remove the scoops.

ELECTRIC CONSUMPTION: 0.5 KW

WEIGHT: 20 lbs.

MEASUREMENTS: 18" x 6 x 16"